Help Flussonic20.12 Rebel Edition
M
Offline
Hello
From forum help i could easily install the flussonic , but issue is I could not pull the unicast udp .. as i am unaware of network namesapce which was mention on flussonic.
I have 2 interface port
1. eth1 with ip (192.168.10.0/24) , which connects to internet as well as pull and push unicast udp/hls/rtmp
(Issue is unable to accept unicast udp send from other transcoding server udp://192.168.X.X:1234 )
Failed to Pull these types of url
stream test12 {
url udp://192.168.100.10:1234;
}
2. eth2 with (172.100.100.1/24) somehow manage to pull multicast udp (239.10.100.1:5000)
Issue ..
How can i accept udp unicast from eth1 as well
From forum help i could easily install the flussonic , but issue is I could not pull the unicast udp .. as i am unaware of network namesapce which was mention on flussonic.
I have 2 interface port
1. eth1 with ip (192.168.10.0/24) , which connects to internet as well as pull and push unicast udp/hls/rtmp
(Issue is unable to accept unicast udp send from other transcoding server udp://192.168.X.X:1234 )
Failed to Pull these types of url
stream test12 {
url udp://192.168.100.10:1234;
}
2. eth2 with (172.100.100.1/24) somehow manage to pull multicast udp (239.10.100.1:5000)
ip link set eth2 netns netns0
ip netns exec netns0 ifconfig eth2 up
ip netns exec netns0 ip addr add 10.3.8.23/24 dev eth2
ip netns exec netns0 route add -net 224.0.0.0 netmask 240.0.0.0 eth2
stream test {
url udp://224.1.1.1:3000;
}
ip netns exec netns0 ifconfig eth2 up
ip netns exec netns0 ip addr add 10.3.8.23/24 dev eth2
ip netns exec netns0 route add -net 224.0.0.0 netmask 240.0.0.0 eth2
stream test {
url udp://224.1.1.1:3000;
}
Issue ..
How can i accept udp unicast from eth1 as well