Download MultiCS r82 All Versions

[toni]

MultiCS r82 All Versions

- [FIX] Lower profiles will get cache hits now on servers with many profiles. Anyway be advised that the more profiles you add to multics the more processing power it takes on any multics version. No need to have America and Asia profiles if you live in Europe mate

- [ENH] Get full CACHE configuration including active peers to a text file by downloading from

Please, Log in or Register to view URLs content!

ORT/cache?action=config
- [ENH] Improve error messages when reading config files. Most messages will now show line and column of the config file where the error is detected. Suggestion: launch multics with -f -v and see output if it shows any errors/warnings in your config.
- [FIX] Added omitted CCcam Server versions "2.1.4", "2.2.0", "2.2.1".
- [FIX] Fixed if non valid version of CCcam Server was set, (caused segfault). Now it will set default to 2.0.11.

To view the content, you need to Sign In or Register.

 

[toni]

r82-hellboy-V30

- [FIX] Solved BIG memory leak in web interface (upgrade recommended)
- [FIX] Show correct CACHE TIMEOUT of each profile in the show config page
- [ENH] Add country flags to source ip address on failban page. Source ip address is now clickable and you can go to

Please, Log in or Register to view URLs content!

directly to get more information on that IP
- [ENH] Add button to close all open alerts
- [ENH] Generate alerts for more situations related to bad authentication of users when it's available for the specific cs protocol:
* Good username but bad password
* Multiple connections, with indication of the following cases:
+ Multiple connections in more that 60 seconds (Already connected)
+ Multiple connections in less that 60 seconds (Just connected)
+ Multiple connections from different IP
* This information was already in the logs of multics. We are only adding it to alerts so people that never look logs can take care of it.
- [ENH] New feature to add cccam and mgcamd users from web interface. To enable it modify the INCLUDE of the file that will hold the new users like the following:
// File that will hold the users
INCLUDE: "/var/etc/users.cfg", USERFILE
New users will be added at the end of the defined USERFILE.
Only one USERFILE definition can be used.
Once enabled the web interface will show a new form in the CCCAM and MGCAMD pages to allow adding new users.
Only username and password, no more is included in the web interface. If you need to add other things to the users you use the normal editor.
- [ENH] Allow disable/enable cacheex clients and servers from cacheex page on web interface
- [ENH] Include HTTPALLOWEDIP and HTTPALLOWEDHOST parameters in configuration to restrict http web interface access to specific sources.
* All sources not included here will not have access to http web interface.
* If none of this new parameters HTTPALLOWEDIP and HTTPALLOWEDHOST is defined source access control will be disabled.
* HTTPALLOWEDIP will hold a comma separated list of IP addresses or IP ranges like in these examples:
HTTPALLOWEDIP: 127.127.127.127, 127.0.0.1-127.0.0.255
HTTPALLOWEDIP: 0.0.0.0-255.255.255.255 ### This would be equivalent to disabling access control
* HTTPALLOWEDHOST will hold a comma separated list of hostnames. Your server SHOULD be able to DNS resolve those hostnames.
* There's a proccess inside multics that tries resolve those hostnames at certain intervals, but it's not running continuosly. So when multics starts allow sometime (at least one minute) for this process to execute and when the DNS is updated (dynamic DNS) allow also at least one minute too plus the DNS propagation time that is out of multics control.
* Example of HTTPALLOWEDHOST:
HTTPALLOWEDHOST: yourwork.no-ip.org, yourhouse.no-ip.org* Note that there's no single (') or double (") quotes for hostnames and for IP address. You'll get an error if you use them.

* Note that spaces are not allowed inside IP ranges.
- [ENH] Include NOIPFAILBAN and NOHOSTFAILBAN parameters in configuration to allow specifiying sources that won't be included in failban.
* If none of this new parameters NOIPFAILBAN and NOHOSTFAILBAN there will be no exceptions for failban.
* 127.0.0.1 ip address will be added if not included in the configuration.
* Syntax is equivalent to HTTPALLOWEDIP and HTTPALLOWEDHOST.

To view the content, you need to Sign In or Register.

 

[bensalah]

r82-hellboy-V30

- [FIX] Solved BIG memory leak in web interface (upgrade recommended)
- [FIX] Show correct CACHE TIMEOUT of each profile in the show config page
- [ENH] Add country flags to source ip address on failban page. Source ip address is now clickable and you can go to

Please, Log in or Register to view URLs content!

directly to get more information on that IP
- [ENH] Add button to close all open alerts
- [ENH] Generate alerts for more situations related to bad authentication of users when it's available for the specific cs protocol:
* Good username but bad password
* Multiple connections, with indication of the following cases:
+ Multiple connections in more that 60 seconds (Already connected)
+ Multiple connections in less that 60 seconds (Just connected)
+ Multiple connections from different IP
* This information was already in the logs of multics. We are only adding it to alerts so people that never look logs can take care of it.
- [ENH] New feature to add cccam and mgcamd users from web interface. To enable it modify the INCLUDE of the file that will hold the new users like the following:
// File that will hold the users
INCLUDE: "/var/etc/users.cfg", USERFILE
New users will be added at the end of the defined USERFILE.
Only one USERFILE definition can be used.
Once enabled the web interface will show a new form in the CCCAM and MGCAMD pages to allow adding new users.
Only username and password, no more is included in the web interface. If you need to add other things to the users you use the normal editor.
- [ENH] Allow disable/enable cacheex clients and servers from cacheex page on web interface
- [ENH] Include HTTPALLOWEDIP and HTTPALLOWEDHOST parameters in configuration to restrict http web interface access to specific sources.
* All sources not included here will not have access to http web interface.
* If none of this new parameters HTTPALLOWEDIP and HTTPALLOWEDHOST is defined source access control will be disabled.
* HTTPALLOWEDIP will hold a comma separated list of IP addresses or IP ranges like in these examples:
HTTPALLOWEDIP: 127.127.127.127, 127.0.0.1-127.0.0.255
HTTPALLOWEDIP: 0.0.0.0-255.255.255.255 ### This would be equivalent to disabling access control
* HTTPALLOWEDHOST will hold a comma separated list of hostnames. Your server SHOULD be able to DNS resolve those hostnames.
* There's a proccess inside multics that tries resolve those hostnames at certain intervals, but it's not running continuosly. So when multics starts allow sometime (at least one minute) for this process to execute and when the DNS is updated (dynamic DNS) allow also at least one minute too plus the DNS propagation time that is out of multics control.
* Example of HTTPALLOWEDHOST:
HTTPALLOWEDHOST: yourwork.no-ip.org, yourhouse.no-ip.org* Note that there's no single (') or double (") quotes for hostnames and for IP address. You'll get an error if you use them.

* Note that spaces are not allowed inside IP ranges.
- [ENH] Include NOIPFAILBAN and NOHOSTFAILBAN parameters in configuration to allow specifiying sources that won't be included in failban.
* If none of this new parameters NOIPFAILBAN and NOHOSTFAILBAN there will be no exceptions for failban.
* 127.0.0.1 ip address will be added if not included in the configuration.
* Syntax is equivalent to HTTPALLOWEDIP and HTTPALLOWEDHOST.

*** Hidden text: cannot be quoted. ***

merci beucoup mon ami dd

 

[bensalah]

r82-hellboy-V30

- [FIX] Solved BIG memory leak in web interface (upgrade recommended)
- [FIX] Show correct CACHE TIMEOUT of each profile in the show config page
- [ENH] Add country flags to source ip address on failban page. Source ip address is now clickable and you can go to

Please, Log in or Register to view URLs content!

directly to get more information on that IP
- [ENH] Add button to close all open alerts
- [ENH] Generate alerts for more situations related to bad authentication of users when it's available for the specific cs protocol:
* Good username but bad password
* Multiple connections, with indication of the following cases:
+ Multiple connections in more that 60 seconds (Already connected)
+ Multiple connections in less that 60 seconds (Just connected)
+ Multiple connections from different IP
* This information was already in the logs of multics. We are only adding it to alerts so people that never look logs can take care of it.
- [ENH] New feature to add cccam and mgcamd users from web interface. To enable it modify the INCLUDE of the file that will hold the new users like the following:
// File that will hold the users
INCLUDE: "/var/etc/users.cfg", USERFILE
New users will be added at the end of the defined USERFILE.
Only one USERFILE definition can be used.
Once enabled the web interface will show a new form in the CCCAM and MGCAMD pages to allow adding new users.
Only username and password, no more is included in the web interface. If you need to add other things to the users you use the normal editor.
- [ENH] Allow disable/enable cacheex clients and servers from cacheex page on web interface
- [ENH] Include HTTPALLOWEDIP and HTTPALLOWEDHOST parameters in configuration to restrict http web interface access to specific sources.
* All sources not included here will not have access to http web interface.
* If none of this new parameters HTTPALLOWEDIP and HTTPALLOWEDHOST is defined source access control will be disabled.
* HTTPALLOWEDIP will hold a comma separated list of IP addresses or IP ranges like in these examples:
HTTPALLOWEDIP: 127.127.127.127, 127.0.0.1-127.0.0.255
HTTPALLOWEDIP: 0.0.0.0-255.255.255.255 ### This would be equivalent to disabling access control
* HTTPALLOWEDHOST will hold a comma separated list of hostnames. Your server SHOULD be able to DNS resolve those hostnames.
* There's a proccess inside multics that tries resolve those hostnames at certain intervals, but it's not running continuosly. So when multics starts allow sometime (at least one minute) for this process to execute and when the DNS is updated (dynamic DNS) allow also at least one minute too plus the DNS propagation time that is out of multics control.
* Example of HTTPALLOWEDHOST:
HTTPALLOWEDHOST: yourwork.no-ip.org, yourhouse.no-ip.org* Note that there's no single (') or double (") quotes for hostnames and for IP address. You'll get an error if you use them.

* Note that spaces are not allowed inside IP ranges.
- [ENH] Include NOIPFAILBAN and NOHOSTFAILBAN parameters in configuration to allow specifiying sources that won't be included in failban.
* If none of this new parameters NOIPFAILBAN and NOHOSTFAILBAN there will be no exceptions for failban.
* 127.0.0.1 ip address will be added if not included in the configuration.
* Syntax is equivalent to HTTPALLOWEDIP and HTTPALLOWEDHOST.

*** Hidden text: cannot be quoted. ***

ok ok ok ok ok

 

[toni]

someone should have added this to the HB-35
[ENH] Hellboy up v35, MultiCS Cache will be accepted only from Hellboy v35 and up
multics-r82-hellboy-v36
[FIX] CS378X fixed, now working LG Cacheex from OSCAM ( here must be some more funtionalities to Implement because only connect and
if LG active then no hits ) and CS378X Normal lines working again
[ENH] Added sort to all important Fields like in: Cache ( HOST, IP, ADDRESS, PING, REQUESTS, REPLIES, SENT REQ, SENT REP, CACHE HITS, INSTANT HITS )
and on Profiles( TOTALECM, ACCEPTEDECM, ECM OK ) and at least in CacheEX ( HITS, INSTANT HITS ). If you are with mouse over these Tables the update is
working only on ROW where the mouse over situated, if you move the mouse out of table the refresh comes back like normal. For sort you have to click on
these Fields from table, every click change the sort order Descending then Ascending
multics-r82-v36

To view the content, you need to Sign In or Register.

 

[toni]

multics-r82-v37

To view the content, you need to Sign In or Register.

 

[toni]

r82-hellboy-V38

- [FIX] CAMD35 is fixed, here the users if they are inactive 90 seconds they appear like offline because Camd35 is UDP so there's no connection
- [ENH] If there a newer version of HB then it will popup a message (For your Info - There is a newer version of HB, please update for better compatibility.) on every page visit, in this case editor and restart menu will be disabled as well

To view the content, you need to Sign In or Register.

 

[toni]

1. - [ENH] New option SIDSWCRC, where you can add your SID'(s) list for those Profile'(s) where DISABLECRCCWS enabled but some of SID'(s) need CRCCheck like 48Bit by 09C4 and maybe other Provider'(s) as well, for syntax please read the multics.cfg inclulded in archive
2. - [APY] F, MGUSER, CAMD35 USER, CS378X USER all limited to 400, this is a hobby. All Cacheex capable users limited to how many normal and or cacheex setup you have Ex: 200 CS378X normal user - then you able to set 200 CS378X cacheex user till you reach the limit of 400 total

To view the content, you need to Sign In or Register.

 

[toni]

r82-hellboy-V40


-[FIX] With the new parameter SIDSWCRC you can now use DISABLEGERMANPATCH: NO, better not to disable, on client side neeed skip for all to work
- [ENH] SMS messege will be sent to Telegram if you have TELEGRAM enabled in your config, SMS size max 700 Chars
- [CLN] Expiredate removed ! this is a hobby
- [SEC] SMS send and receive message sanitized
- [ENH] Added new options for TELEGRAM module: Default option is to send you a message on every HB start so this no need param

TELEGRAM CCCAM: 1 - this will send you messages from CCcam
TELEGRAM CACHE: 1 - sale as the first one just for Cache ans so on till system
TELEGRAM MGCAMD: 1
TELEGRAM CS378X: 1
TELEGRAM NEWCAMD: 1
TELEGRAM CAMD35: 1
TELEGRAM SYSTEM: 1 -
by this option you will get the message if someone tried to login to your webif but invalid credentials and also the SMS send Note: all line options except system,
re only active if you have also the firewall (FAILBAN) active, because it would be too much messages and if a user would get banned trought FAILBAN then it comes only once.

To view the content, you need to Sign In or Register.

 

[toni]

r82-hellboy-V41

- [ENH] to get rid of all stupid ECM requests, there is a new option introduced. ECM HEADERWLST: 0102030405,0102030406 and this way we can filter ECM requests with wrong header. This options must be set on all profiles
- [ENH] added new field to Profiles on WEBIF to show how many ECM LENGTH and ECM HEADER was blocked
- [ENH] added ecm length to see in Debug log window id decode failed
- [FIX] pages refresh was fix by focused inputs and mousever events, removed not to refresh the whole page when it's not needed

To view the content, you need to Sign In or Register.

 

[toni]

r82-hellboy-V42

- [ENH] to get rid of all stupid ECM requests, there is a new option introduced. ECM HEADERWLST: 0102030405,0102030406 and this way we can filter ECM requests with wrong header. This options must be set on all profiles
- [ENH] added new field to Profiles on WEBIF to show how many ECM LENGTH and ECM HEADER was blocked
- [ENH] added ecm length to see in Debug log window if decode failed
- [FIX] pages refresh was fix by focused inputs and mousever events, removed not to refresh the whole page when it's not needed
- [FIX] fixed issue on index page what caused segfault wehn accessed the home page

To view the content, you need to Sign In or Register.

 

[toni]

r82-hellboy-V43

- [ENH] Added checksum for all NDS caid request, all failed checksum's will be flaged in Debug as "ECM Checksum Error"
- [FIX] Fix on Version blocking
- [SEC] all connections from HB Versions will be allowed only previous Versions, all older will be blocked

To view the content, you need to Sign In or Register.

 

[toni]

r82-hellboy-V44

- [ENH] Added to Editor page line numbers and current position, now you can better identify the errors from verbose mode and also overall view is better. The current position is same like the error show's in verbose mode
- [FIX] some HB connections was disabled by accident, this was fixed
- [LNK] by request of Admin from multics.info, added the webpage link to the first page

To view the content, you need to Sign In or Register.